Troubleshooting - dBTechnologies B-HYPE 8 Manual Del Usuario

5. TROUBLESHOOTING

The speaker will not turn on:
1. Check that power supply is present upstream of the installation.
2. Ensure that the power supply cable with VDE connector is properly plugged in.
The speaker turns on but produces no sound:
1. Check that the input connection of the audio signal is correctly performed.
2. Check the cables for damage.
3. Ensure that the mixer or audio source is on and an output signal is present.
4. Check the general level through the "VOLUME" control.
Speaker sound is distorted or not sufficient:
1. Check the cables for damage and replace them as required (a damaged cable may lead to signal loss or
alteration).
2. Check that the selection settings of "Audio Input Sensitivity" input are correct with respect to the
source.
B-HYPE 8 - B-HYPE 10 - B-HYPE 12 - B-HYPE 15
30
English
Cod. 420120254 REV. 1.0