Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Inglés_Maquetación 1 25/11/15 09:55 Página 63
3. Install filter
After the filer is cleaned and dried, reinstall it well.
Note:
- The filter should be cleaned about once every three
months. If there's much dust in the operation environment, you can
increase clean frequency.
- Do not dry the filter with fire or hair drier. Otherwise, it may be defor-
med or catch fire.
Clean heat-removal pipe
Remove the heat-removal pipe from air conditioner, clean and dry it,
and then reinstall it. (For the method of installation and removal
method, please refer to the instruction for Install and Remove Heat-
removal Pipe).
CHECKING BEFORE USE-SEASON
1. Check whether air inlets and air outlets are blocked.
2. Check whether plug and socket are in good condition.
3. Check whether filter is clean.
4. Check whether batteries is installed in remote controller.
5. Check whether joint, window bracket and heat-removal pipe are
installed tightly.
6. Check whether heat-removal pipe is damaged.
CHECKING AFTER USE-SEASON
1. Disconnect power supply.
2. Clean filter and outer case.
3. Remove dust and sundries on the air conditioner.
4. Eliminate accumulated water in chassis (refer to the section of
"discharge method" for details).
5. Check whether window bracket is damaged or not. If yes, please
contact dealer.
- 63 -
E
N
G
L
I
S
H
Tabla de contenido
