Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Inglés_Maquetación 1 25/11/15 09:55 Página 57
OPERATION INTRODUCTION OF REMOTE CONTROLLER
NOTE:
After putting through the power, the air conditioner will give out a sound.
After that, you can operate the air condition by remote controller.
Under ON status, after each pressing of the button on remote contro-
ller, signal sending icon on display screen of remote controller "
will flash once. If the air conditioner gives out a sound, it indicates the
signal has been send to air conditioner.
Under OFF status, display screen of remote controller displays set
temperature.
Under ON status, display screen displays corresponding function
icon of the air
conditioner.
ON/OFF button
Press this button can turn on or turn off the air conditioner.
MODE button
Press this button and the mode will circulate according to below
sequence: AUTO→COOL→DRY→FAN→HEAT (This function is only
applicable for heat pump unit).
After you selecting mode, corresponding will be bright.
After selecting AUTO mode, air conditioner will operate automatically
according to ex-factory setting. Set temperature can't be adjusted
and displayed. Press "FAN" button to adjust fan speed.
After selecting COOL mode, air conditioner will operate under coo-
ling mode.
Press "+" or "-" button can adjust set temperature. Press "FAN" but-
ton to adjust fan speed.
After selecting DRY mode, air conditioner will operate under drying
mode at low speed. Fan speed can't be adjusted.
After selecting fan mode, air conditioner only blow fan. Press "FAN"
button to adjust fan speed.
- 57 -
"
E
N
G
L
I
S
H
Tabla de contenido
