Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Inglés_Maquetación 1 25/11/15 09:55 Página 58
Cooling only unit can't receive heating mode signal. If set HEAT
mode by remote controller, press ON/OFF button can't turn on the air
conditioner.
+/- button
After each pressing "+" or "-" button, set temperature will increase or
decrease 1℃(℉). When holding "+" or "-" button, 2s later, set tem-
perature will change quickly. Loose the button on remote controller
after setting temperature. (temperature can't be adjusted under auto
mode).
Under TIMER ON, TIMER OFF or clock setting, press "+" or "-" but-
ton to adjust time. (refer to TIMER button for detailed setting).
FAN button
Press this button to select fan speed in sequence: auto (AUTO),
first notch (
(
).
This function is not available for this air conditioner. Fourth notch is
same as third notch.
OPERATION INTRODUCTION OF REMOTE CONTROLLER
First notch (same as low speed on control panel)
Second notch (same as medium speed on control panel)
Third notch (same as high speed on control panel)
Fourth notch
Note:
- Under AUTO fan speed, air conditioner will select proper fan speed
according to ex-factory setting.
- Fan speed can't be adjusted under DRY mode.
), second notch (
- 58 -
), third notch (
), fourth notch
E
N
G
L
I
S
H
Tabla de contenido
