3.1.
Precautions for use
The
operator
responsible authority must carefully
read and clearly understand the various
precautions to be taken in use.
Do not use the instrument in an
explosive
atmosphere
presence of inflammable gas or smoke.
Do not use the instrument on
networks with a rated voltage or
category higher than those mentioned.
Respect
the
voltages
and
terminals and in relation to the earth.
Do not use the instrument if it
seems
damaged,
incorrectly closed
Before
each
condition of the cable insulation, the unit
and the accessories.
3.2.
First use
Place the batteries in the device as follows:
1.
Use a screwdriver, unscrew all the
battery cover screws on the back of the
meter.
2.
Place the batteries in the casing,
respect polarity.
3.
Screw back battery cover screws
3.
and/or
the
or
in
the
maximum
rated
currents
between
incomplete
use,
check
the
USE
All elements on which the insulation is
damaged (even partially) must be put out
of service for repair or disposed at waste.
Use cables and accessories for
voltage according to IEC 61010-2-031 and
measurement categories at least equal to
those
of the instrument.
accessory of a lower category reduces the
category of the combined multimeter +
accessory to that of the accessory.
Respect the environmental conditions
of use.
Use personal protection equipment
when conditions require it.
or
Keep your hands and fingers away
from the unused terminals of the device.
When handling sensors or test probes, do
not place fingers beyond physical finger
guard.
If
not, an
30