Intended Use - Makita TL064D Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
No load speed
Impacts per minute
Maximum fastening torque
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
Model:
Fastening capacities
Square drive
No load speed
Impacts per minute
Maximum fastening torque
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model TL064D
Sound pressure level (L
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model TL065D
Sound pressure level (L
Sound power level (L ) : 101 dB (A)
WA
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Machine screw
Standard bolt
High tensile bolt
Standard bolt
High tensile bolt
) : 91 dB(A)
pA
) : 90 dB(A)
pA
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
DC10SA / DC10SB / DC10WC / DC10WD
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
DC10SA / DC10SB / DC10WC / DC10WD
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model TL064D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model TL065D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
5 ENGLISH
TL064D
4 mm - 8 mm
M4 - M12
M4 - M8
-1
0 - 2,000 min
-1
0 - 3,000 min
60 N•m
361 mm - 380 mm
1.2 - 1.6 kg
TL065D
M4 - M12
M4 - M8
9.5 mm
-1
0 - 2,000 min
-1
0 - 3,000 min
60 N•m
361 mm - 380 mm
1.2 - 1.6 kg
2
) : 15.0 m/s
h
2
2
) : 18.0 m/s
h
2