Abrasive Cutting Wheels; Composite Cutting Wheels - Stihl TS 700 Manual De Instrucciones

English

Abrasive Cutting Wheels

Abrasive cutting wheels are exposed to
high loads, especially during hand-held
cutting.
Only use abrasive cutting wheels that
comply with ANSI B 7.1 for hand-held
machines and are labeled accordingly.
Note that the maximum permissible
speed of the cutting wheel must be
higher than the maximum spindle speed
listed on the wheel guard label.
The abrasive cutting wheels that have
been developed for STIHL for use on
cut-off machines are of high quality and
tailored to the intended uses as well as
the engine specifications and
performance of this cut-off machine. Use
of other wheels on your cut-off machine
can be extremely dangerous and may
result in severe personal injury or death.
Transport and storage
Do not expose composite cutting
–
wheels to direct sunshine or other
thermal stresses during transport
and storage.
Avoid jolts and impacts.
–
Stack composite cutting wheels flat
–
on a level surface in the original
packaging in a dry place where the
temperature is as constant as
possible.
Do not store composite cutting
–
wheels in the vicinity of aggressive
fluids or chemicals.
26
Store composite cutting wheels in a
–
frost-free place.
Do not transport a cut-off machine
–
with a abrasive cutting wheel
mounted, whether composite or
diamond.

Composite Cutting Wheels

Types:
for dry applications
–
for wet applications
–
Economic benefit is improved and
premature wear can be avoided by
choosing and using the correct
composite cutting wheel. The short
name (e.g. "asphalt", "concrete")
on the label and
–
on the packaging (table with
–
recommended uses)
can help to ensure the correct choice.
STIHL composite cutting wheels are
suitable, depending on the version, for
cutting the following materials:
Asphalt
–
Concrete
–
Stone
–
Ductile cast pipes
–
Steel; STIHL composite cutting
–
wheels cannot be used to cut
railway tracks.
Do not cut any other materials with your
composite cutting wheel. Always use a
composite cutting wheel rated for the
TS 700, TS 800