Troubleshooting - Titan speeflo powrDriver Manual Del Propietário

Problem
A. engine does not start
B. engine races to high rpm or
stalls during operation
C. engine operates, Sulky Driver
does not move forward or
reverse.
D. engine operates, powrDriver
moves slowly in forward or
reverse.
e. engine shuts off when
operator exits PowrDriver.
F. engine continues to run when
operator exits PowrDriver and
parking brake is not set.
G. Engine misses during turns
and forward and reverse
changes.
H. Engine runs for short time and
stops.
English

Troubleshooting

cause
1. engine switch oFF, no gas or low oil.
1. Worn throttle lever, governor
1. low hydraulic oil.
2. Foot pedal controls out of position.
3. Transmission linkage components are
loose.
1. low hydraulic oil.
2. Foot pedal controls out of position.
1. Safety switch.
1. Safety switch.
1. engine oil low.
1. Fuel flow restriction.
Solution
1. Consult engine manual.
1. Consult engine manual.
1. Fill with hydraulic oil.
2. position foot pedal in neutral position. Turn tensioner
slowly until the unit stops moving.
3. Secure set screw in transmission arm with loctite.
1. Fill with hydraulic oil.
2. position foot pedal in neutral position. Turn tensioner
slowly until the unit stops moving.
1. Correct operation.
1. Replace safety switch and/or any connecting wires.
1. Fill to correct oil level.
1. Consult engine manual.
6 © Titan Tool Inc. All rights reserved.