Parkside PAT 4 D5 Traduccion Del Manual De Instrucciones Originale página 47

4–6 mm staple or 6–8 mm nail in length will typically suffice when
driving into plywood and fiber board.
8–12 mm staple or 10 mm nail in length will typically suffice when
fastening into softwood such as pinewood.
The crown of the staple or head of the nail should be flushed with the
top of the material being fastened as shown.
If the crown of the staple/head of the nail is not flush with the material
to be fastened, the staple/nail is too long. In this case, use the next shorter
staple or nail for optimal results.
Cleaning and care
Switch off the product before cleaning and maintaining. To do this,
press the On/Off switch
The product must always be clean, dry, and free from oil and grease.
Clean the housing with a dry cloth.
to the "0" position.
8
GB/IE 47