Parkside PAT 4 D5 Traduccion Del Manual De Instrucciones Originale página 45

Note: The product cannot be used whilst charging. It is normal
for the handle to warm up slightly whilst charging.
Initial use
Adding staples
Set the On/Off switch
the product.
Turn the product over.
Squeeze the release button
Pull back on the pusher
Add staples to the magazine
After adding staples, slide the pusher
zine is fully closed. Release the release button
4
and lock into place for the magazine
Note: Use the window on the fill indicator
zine is empty.
4
Adding nails
Set the On/Off switch
the product.
Turn the product over.
Squeeze the release button
Pull back on the pusher
Follow icon shown on pusher
magazine (see Fig. C)
4
After adding nails, slide the pusher
is fully closed, (see Fig C).
4
Release the release button
the magazine
4
to the "0" position before working on
8
(see Fig. B).
3a
(see Fig. B).
3
(see Fig. C).
4
to the "0" position before working on
8
(see Fig. B).
3a
(see Fig. B)
3
(see Fig. C) and add nails to the
3
. It must click and lock into place for
3a
to be closed correctly.
in again until the maga-
3
3a
to be closed correctly.
4
to see if the maga-
5
in again until the magazine
3
. It must click
GB/IE 45