Protimeter Surveymaster Manual De Instrucciones página 9

Reference Mode of Measurement:
Note:
For application information, see the section "Using the
Pin (WME) Mode."
In either mode, take the first measurement which needs to be
taken as reference. While the first reading is displayed on the
screen, press and hold the
Reference Mode. The display will be similar to the one shown
on the next page.
To return to the normal measurement mode, press
Settings:
Press and hold the
pressing
displays the version.
Release both buttons while it shows the version number. The
unit enters Settings Mode.
Protimeter Surveymaster
button and switch on the unit by
. Hold both the buttons until the Surveymaster
button for 2 seconds to enter the
again.
Page 7