SJE Rhombus EZ In-Site Serie Manual De Instalación Y Operación página 2

Mounting the Control Panel
1
Install top fastener using appropriate anchor.
Installing the SUB-X
® ®
The EZ Series In-Site CL control panel operates with a SUB-X™ LT or C-Level™ sensor and 1 or 2 recommended oat switches.
The SUB-X™ LT or C-Level™ sensor operates the Pump Start, Stop and Alarm functions. The back-up oat switches are for
redundant o and high level alarm.
Ensure all supply power to the control panel is turned OFF before installing or servicing the SUB-X™ LT or C-Level™ sensor, oat
switches, or pumps in the tank. Failure to do so could result in serious or fatal shock.
Off
NOTE
Do not run SUB-X™ LT or C-Level™ sensor cable or oat switch cables in the same conduit as the pump cables.
EN2
LT or C-Level Sensor & Recommended Float Switches
™ ™
2
Install bottom fastener(s) using appropriate anchors.
Power from Breaker