Leica CINE 1 Instrucciones Abreviadas página 34

HANGING THE SCREEN
We strongly recommend the screen being carried by two people. Always wear gloves (included) to protect the screen against grease, sweat, and dirt.
Place the assembled screen on the floor in an upright position.
Look at the screen from a horizontal perspective. If the screen looks black, it is correctly positioned and ready to be attached to the wall. If the screen looks
white, rotate it and then attach it.
Remove the protective paper on one side of the Velcro strips. Attach the Velcro strips to the bottom left and right of the back of the screen.
Place the screen on the wall brackets.
Note: The Leica Laser TV should not be ceiling mounted. If you ceiling mount the Leica Laser TV, the orientation of the screen must be rotated. This impairs
the ability to compensate for the ambient light.
WARNING: Laser beams can damage the eyes. Do not look directly into the lens of the Leica Laser TV when it is switched on.
Adjust the height of the screen by twisting the adjustment hooks (
Use the top edge of the screen for guidance to adjust the screen to the displayed image.
Ensure that the screen is completely straight both horizontally and vertically.
Remove the adjustment hooks (
If the screen is higher than the image displayed, twist the adjust-
ment hooks clockwise to lower the screen.
If the screen is lower than the image displayed, twist the adjust-
ment hooks counterclockwise to raise the screen.
).
X
X ) and the adjustment rods ( Y1 ) for the wall brackets.