Leica CINE 1 Instrucciones Abreviadas página 26

MOUNTING THE SCREEN
Note
Before mounting the screen ( H ), put on the assembly gloves provided (
material (figure 1). The screen (
to observe the instructions can result in permanent damage to the screen material that is not covered by the warranty.
Remove the screen ( ) from the packaging tube and carefully place it on a clean surface.
H
• Tip: carefully place a small, flat, heavy object on the edge to prevent the screen from slipping.
• Ensure the front of the screen points downward.
We strongly recommend the screen being unrolled by two people to prevent it from bending or unrolling unevenly.
• Each person should hold one end of the roll and slowly unroll the screen in a clockwise direction (figure 2).
• Tip: check the labeling to determine which is the underside of the screen.
Place the screen front down and completely flat on a clean surface in a horizontal position (figure 3).
Figure 1
H ) is highly sensitive and should be handled with the utmost care. Ensure that the material is not misshapen or creased. Failure
Front
Figure 3
G ) to prevent the transfer of fingerprints, dust, or oil from your hands to the surface of the
Figure 2
Back
Protective sheet