Leica CINE 1 Instrucciones Abreviadas página 32

In the case of a studded drywall
Use a stud detector to find the studs that lie behind the paper template (
Follow the vertical line on the paper template and mark the positions of the lower screws in the suggested area.
Drill holes for the four screws at the marked points.
Remove the paper template and use the screws to fasten the wall brackets (
Note: hold the wall brackets while tightening the screws to prevent them from slipping.
In the case of a solid concrete or hollow block wall
Drill holes for the top screws.
Follow the vertical line on the paper template (
Remove the paper template and insert four wall plugs (
Ensure that the wall plugs end flush with the wall.
Use the screws to fasten the wall brackets (
Note: hold the wall brackets while tightening the screws to prevent them from slipping.
Note: All screws must be fully tightened to prevent the wall brackets from moving. Ensure that the wall brackets are securely attached to the wall before mov-
ing on to the next step.
Z2
Z2 ) and drill holes for the bottom screws within the intended area.
Z1 ) into the holes.
) in place.
W
). Mark the middle of the studs with a pencil.
W ) in place.