Idiomas disponibles
Idiomas disponibles
EN
7. recharging the battery
attention!
Do not expose the battery to extreme conditions such as excessive temperatures or shocks. Injury can be caused by
the loss of battery material.Disconnect the battery from the tool before start charging.
Make sure the battery is dry and clean before start charging.
1. Make sure the battery is fully charged before using it for the first time.
2. The battery is not fully charged when purchased, charge it for 3-4 hours before using it for the first time.
3. Before charging the battery, check the remaining charge on the display.
4. The battery must be replaced if its life start being insufficient. Use only the original batteries supplied by the manufacturer.
5. Respect the safety and environmental protection guidelines during each phase.
7.1 Battery charging procedure:
1. Recharge indoor, temperature between + 10 ° C and 22 ° C.
2. Make sure that the characteristics of the charger and the battery are aligned before starting the recharge.
3. The red LED light on the charger indicates that the battery is charging, the green LED light indicates that it is fully charged.
4. The approximate charging time is 2 hours (charging time per battery).
5. Disconnect the battery charger connectors from the batteries once the charge is complete.
6. Make sure the battery is charged at least every 3 months when not in use. Do not store the machine with the battery connected .
8. WORKING ENVIRONMENT
1. Keep the temperature between 10 ° C and 22 ° C during the charging phase and between 0 ° C and 45 ° C during use.
2. Keep the tool temperature between 0 ° C and 60 ° C during use.
3. Do not use it in an explosive environment or near flammable materials or liquids.
4. Do not use it in rainy weather or on wet branches.
11
