Idiomas disponibles
Idiomas disponibles
EN
2. general safety information
warning!
Read all safety directions and instructions. Omissions in the compliance with safety directions and instructions
can cause electric shock and fire and/or severe injuries. Retain all safety directions and instructions for future use. The
term "power tools" used in the safety instructions refers to mains-operated power tools (with power cord) and battery-operated
power tools (without power cord).
2.1 Work area safety:
1. Keep work area clean and light. Cluttered or dark areas will cause accidents.
2. Do not operate power tools in explosive and flammable atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks, which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool..
2.2 Electrical safety for battery charger:
1. Power tool plug must match the outlet. Never modify the plug in anyway. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of electrical shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
5. Keep the cable away from sources of heat, oil, sharp edges and moving parts. A damaged or tangled cord can increase the
risk of electric shock.
6. If the charger is used outdoors, use an extension cable suitable for outdoor use. The use of a suitable cable reduces the risk
of electric shock.
7. If it is not possible to avoid using the charger in a humid area, use a power supply with an RCD differential switch. The use of
a differential switch reduces the risk of electric shock.
2.3 Warnings for using the tool:
1. Users using a chainsaw for the first time should first perform the necessary cutting exercises at an easel to learn how to operate
the tool.
2. The chainsaw may bounce if it encounters an object that is too hard or if the bar suddenly jams or stops.
4
