Idiomas disponibles
Idiomas disponibles
EN
If there are no traces of oil, check to have refilled the tank. If there are no traces of oil with the tank full, contact the service center.
WARNING!
Never use the chainsaw if the oil pump is not working properly. Keep the chain sharp, contact the authorized service
for this operation.
12.6 Pinion and bar inspection:
1. Disconnect the battery from the chainsaw.
2. Use the Allen key supplied to unscrew the two locking nuts (1) and remove the cover (2).
3. Remove the chain and the bar.
4. Measure the depth of the chain groove using a depth gauge.
5. If the depth of the groove exceeds 0.5 mm, do not use the chainsaw and contact the service center to replace the pinion of
the chain.
6. Measure the depth of the pinion of the chain slot using a depth gauge.
7. If the depth is less than 1.1mm, if the bar is damaged or the slot is deformed, replace the bar to avoid damaging the chain and
the chainsaw.
13. STORAGE
The most important thing to keep in mind before storing your chainsaw is the lithium-ion battery. Make sure that the batteries are
fully charged. If storing the battery for a long time with low charge will damage the battery and invalidate the warranty.
1. Make sure the battery is fully charged.
2. Avoid storing the device in extremely hot or cold environments.
3. If the device will not be used for a long time, please remove the battery before storing it.
4. Batteries and chargers should be placed in a safe place to prevent the entry of heat, dust and humidity.
5. Batteries should be stored in a dry environment. Suggested storage temperatures:
6. Batteries must be kept at a distance of at least 1.5m from possible flammable substances.
7. For good battery maintenance, fully charge it before storage. Charge at least once per 4 months during long periods of disuse .
8. Clean and lubricate all the elements of the machine as described in this manual before storing it.
Less than 1 month
Less than 6 months
More than 6 months
17
-20°C ~ +60°C
-10°C ~ +35°C
0°C ~ +30°C
