Jocel JLLI023018 Manual De Instrucciones página 90

Idiomas disponibles

Idiomas disponibles

TURNING ON THE APPLIANCE
Starting a wash cycle.
Draw out the lower and upper basket, load the dishes and
1. push them back. It is recommended to load the lower basket first, then the upper one
(see the section entitled "Loading the Dishwasher"). Pour in the detergent (see the
section entitled "Salt, Detergent and Rinse Aid").
2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specification
of the socket is 12 A 250 VAC.50 Hz.
Make sure that the water supply is turned on to full pressure. Close the door, press
the"Power"button, Press the "Program" button to select a desired "Wash cycle". (See the
section entitled "Wash Cycle Table"). With a little force to ensure the door is properly closed.
NOTE: A click could be heard when the door is closed perfectly.
When the washing is over, you can shut off the switch by pressing"Power" button.
CHANGE THE PROGRAMME
Premise: A cycle that is underway can only be modified if it has only been running for a short
time.
Otherwise, the detergent may have already been released, and the appliance may have
already drained the wash water. If this is the case, the detergent dispenser must be refilled
(see the section entitled " Fill in the Detergent ").
Press"Power" button to cancel the programme, and turn on it again, then you can change
the programme to the desired cycle setting (see the section entitled "Starting a wash cycle").
NOTE: If you open the door when washing, the machine pauses and warning alarm rings,
the display appears E1. When you close the door, the machine will keep on working.
The 6 programme lights show the state of the dishwasher:
a) One of the programme lights on--> cycle running
b) One of the programme lights blinking -->pause
NOTE: If all the lights begin to glimmer, that indicates the machine is out of order, please
turn off the main power and water supply before calling a service.
FORGET TO ADD DISH
A forgotten dish can be added any time before the detergent cup opens.
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open the door completely.
3. Add forgotten dishes.
4. Close the door, the dishwasher will work after ten seconds.
90
loading