Jocel JLLI023018 Manual De Instrucciones página 83

TO SELECT "AUTOMATIC DOOR OPEN" FUNCTION:
a) Press the power switch and select the "Automatic door open" function by pressing the
function alternative, ALT button until the "Automatic door open" indicator blinks.
b) The "Automatic door open" function will be available after pressing the start/pause
button, and the "Automatic door open" indicator lights.
TO CANCEL "AUTOMATIC DOOR OPEN" FUNCTION:
Automatic door opening function you can disable the default automatic door opening
function by holding down the "Program and ALT keys" at the same time for 3s when the
model is powered on, and the message "OF" appears on the display. Then press the
"Program key" to save the setting function and exit the function setting interface, and the
buzzer will sound to enter the standby interface. Again, press and hold down the "Program
and ALT keys" at the same time for 3s to restore the default automatic door opening function,
and the "OP" word appears on the display, The rinsing temperature increases for the ECO
program after the default automatic door opening function is removed.
TO CHECK THE USER COUNTER FUNCTION:
In the shutdown state, hold down the Power and Function keys for 3 seconds, the buzzer
buzzes, and the display displays the real-time running times. Press the power button to exit
the query status and shut down.
TIPS:
1. Hold down the ALT button for 3s while then dishwasher is washing, and the dishwasher
will be forced to drain and roll out the washing program.
2. The automatic door opener can be manually reset by holding down the Delay and ALT
buttons.
3. All washing procedures are compatible with 3in1 wash blocks or beads except the pre-
washing.
4. If the dishwasher does not open the door after the end of the automatic door opening
function program, it is recommended to push the push rod of the automatic door opener
by hand, and then manually operate the panel to control the automatic door opener to
move back and forth to avoid the failure of the automatic door opener caused by foreign
matter stuck in the gear.
83