cecotec ENERGYSILENCE AERO 5200 LIGHT WHITE Manual De Instrucciones página 48

ENGLISH
3. Natural Breeze shut-off
4. Light button
5. Summer Function
6. Natural Breeze button
7. Speed buttons
8. Timer controls
- Use the speed buttons to select the air power level.
- Press the power button to switch the appliance off.
- Use the timer buttons to select the fan operating time. The fan will switch off once the
selected time has elapsed.
- Press the light button to turn the fan's lamp on and off.
Winter Function
Press button 2 to activate the winter function. The fan will make air flow from the bottom
upwards, bringing cold air to the top of the room.
Summer Function
Press button 5 to activate the summer function. The fan will make air flow from the top
downwards, bringing cold air to the bottom of the room.
Natural breeze
Activate this mode by pressing button 6. The fan will progressively vary the power level in
cycles, providing a feeling of fresh air.
Changing the remote-control battery
The remote control is powered by 2 x 1.5 V AAA batteries.
1. Open the battery compartment.
2. Insert the batteries into the battery compartment observing the polarity.
3. Close the compartment.
Note:
If the fan is not to be used for a long period of time, store the remote control in a dry place
where it will not be exposed to heat or direct sunlight. Also remove the batteries.
Pairing between remote control and receiver
To operate the remote control, reconnect the mains power supply from the electrical
switchboard in the house.
1. Press the power button for 5 seconds and then you will hear a beep, which means
that the pairing has been completed successfully and you can use the remote control
normally.
48
ENERGYSILENCE AERO 5200 LIGHT WHITE / BLACK