Idiomas disponibles
Idiomas disponibles
-
If you do not have a Wi-Fi network or signal near the mower's location, you can pair
the device via Bluetooth, so that the mower can receive directions directly from the app
without the need to link it to the Wi-Fi network.
Connecting the mower to the Internet
Open the app and follow these instructions:
The app is part of the mower system and allows you to download the latest software to
optimise your mower's performance.
1.
Sign up.
2. Pair the mower by scanning the QR code. If your phone does not identify the QR code, press
"Connect via Bluetooth", after which a pop-up window will open where you must select the
Bluetooth device named Mower_XXXXXXXXXXXXXX
3. Enter the mower's password (by default, 0000).
4. Specify the Wi-Fi network to which you want to connect the mower and enter the password.
5. Wait for the pairing process to finish.
5. CLEANING AND MAINTENANCE
WARNING: before cleaning the mower, switch it off. Wear protective gloves before cleaning the
blade disc. It can be cleaned with water, but at low pressure (<1 Mpa).
Maintenance
-
Clean and check the mower from time to time, some parts should be replaced when they
are worn. Turn off the mower before performing any maintenance.
-
Keep blades sharp
WARNING: before cleaning, adjusting, or changing blades, turn off the mower and put on
protective gloves.
WARNING: when fitting new blades, replace all of them (do not leave any of the old ones). It is
not necessary to replace all screws if they are in good condition. You will only have to do this
when the screws are damaged. This is important to ensure that the blades do not fall off and
to balance the blade disc. Failure to replace damaged screws with new ones could result in
serious injury.
-
Blades should be changed regularly (especially if the mower is programmed to run every
day). Always check the blades for chips or damage and, if so, replace them with new
ones. When the blades are not sharp or are worn, replace them. Use the replacement
blades provided.
-
Before changing the blades, turn off the mower and put on protective gloves.
NOTE: after screwing the blades to the disc, make sure that they can rotate properly.
CONGA GRASSHOPPER 500 CONNECTED
ENGLISH
129
