Idiomas disponibles
Idiomas disponibles
Warning! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term power took in all the
warnings listed below refers to your mains operated power
tool.
Save these instructions.
Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Power tool plugs must match the outlet. Never modify the
plugs in any way.
Do not use any adapter plugs with earthed power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or grounded surfaces such
as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock. Do not abuse the cord.
Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock. When operating a power tool
outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock. If operating a power tool in a damp location
is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric
shock.
Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power too while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, no-skid safety shoes,
hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Avoid accidental starting.
Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or
plugging in power tools that have the switch on invites
accidents.
Prevent unintentional starting.
Ensure the switch is in the off position before connecting to
power source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the switch
or energizing power tools that have the switch on invites
accidents. Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations. Dress properly. Do not wear loose
clothing or jeweler.
Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jeweler or long hair can be caught in moving
parts.
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used.
Use of these devices can reduce dust related hazards.
