Idiomas disponibles
Idiomas disponibles
The Ronin TL can only be serviced or repaired by
Ronin or an approved certified repair center. The
maintenance or repair can be scheduled by visiting
roninpowerascender.com
Material Authorization (RMA). Do not open the Ronin
TL or warranty will be voided. The "Do Not Open"
label is a tear away one-use label for anti-tampering.
The brake label provides instructions on which
direction to operate the brake handle for releasing
the brake. The brake is always in the "On" position.
To release the brake, you must physically pull down
on the handle and hold it open to descend. Once you
release the brake, then it will automatically spring back
to the on position. The brake is an On / Off switch and
cannot be feathered. To control descent speed and
ultimately come to a stop, it is recommended to tend
the tailing line of the rope in your right hand, while
holding the brake open with your left hand. Simply
squeezing the rope with your right hand will slow you
down or bring you to a stop, then release the brake
handle. This will help to preserve your ropes life.
Will have the below tensioner label. The tension label
describes which direction to turn the red tensioner
knob to apply less tension (Left Turn) or more tension
(Right Turn) to the rope. Less tension (Left Turn)
decreases the grip on the rope for lighter loads or to
increase descent speed. Turning the tension fully to
the left is to load rope only. Turning it to the Right
(clockwise) direction increases grip on the rope for
ascending / lifting loads.
6
|
RONINPOWERASCENDER.COM
DEVICE LABELS
and obtaining a Return
DO NOT OPEN! ONLY APPROVED REPAIR
STATION CAN OPEN AND SERVICE DEVICE.
