Warning!
The procedure shall be carried out when the steam/hot water wand has cooled down in order to avoid
burns.
After each use, clean the steam/hot water wand using a damp cloth to remove any external milk residues. To
remove any internal residues, follow the steps below:
for a few seconds.
Clean the components of the steam/hot water wand regularly.
downwards. Wash under running water. The hole can be cleaned using a non-abrasive cloth.
- Install the steel tube (K) until it is locked in place. Insert the rubber part by pushing it upwards. If needed,
Warning!
Do not use abrasive detergents.
Warning!
This cleaning operation shall be carried out when the appliance is turned off and the plug disconnected
from the power outlet.
of water and shall be emptied.
Warning!
Do not use vinegar or other descaling agents not authorised by the Manufacturer.
Warning!
Danger of burns due to splashes of hot water and steam that may escape from the steam/hot water
wand.
32
) to start dispensing. The appliance will start dispensing water. Wait until
) to stop delivering steam.
