cecotec ENERGYSILENCE AERO 5200 LIGHT WHITEWOOD Manual De Instrucciones página 39

- Batteries 2 x AAA
- Instruction manual
3. ASSEMBLING THE APPLIANCE
Installing the mounting bracket
1. Use the self-tapping screws, flat washers and lock washers provided to securely fix the
mounting bracket to the ceiling beam. Fig. 2
2. Before fitting the blades, remove the fixing parts. Fig. 3.
3. Insert the motor terminal and the power cable into the receiver. Fig. 4
4. Hang the motor on the two screws already fitted to the mounting bracket. Next, fit the
other screws. Fig. 5
Note: the safety rope must be securely attached to the screw hook of the mounting bracket.
5. Align the blade holes with the holes of the motor and use the screws to fix them. Fig. 6.
NOTE: make sure that all screws fixing the blades are properly tightened and that the blades
are correctly fixed.
6. Fit the decorative caps into the holes. Fig. 7
7. Then fit the lampshade.
WARNING: the acrylic lampshade shall be positioned at an oblique angle. Fig. 8
Connections
WARNING
To avoid the risk of electric shock, be sure to disconnect the mains supply from the
switchboard before connecting the cables.
1. Connect the main power supply (house) to the terminal block located on the mounting
bracket.
2. Plug the receiver into the bracket with the flat side up.
3. Then, connect the cables as follows (Fig. 9):
- Insert the 3P connector of the mounting bracket into the AC POWER INPUT jack of the
receiver.
- Insert the 2P connector from the motor light into the 2P LIGHT socket on the receiver.
ENERGYSILENCE AERO 5200 LIGHT WHITEWOOD / BLACKWOOD
ENGLISH
39