IR INTERFACE
6
The infrared interface for synchronising the radio channel of the receiver and transmitter is located in
the battery compartment. To open the battery compartment, press both markings on the sides of the
battery compartment cover at the same time and flip it forward (for synchronisation procedure, see
RECEIVER MODULE – SYNC).
REPLACING THE BATTERIES
To replace the batteries, open the battery compartment of the bodypack transmitter by simultaneously
pressing on both markings on the sides of the battery compartment cover and folding it forward.
Remove the used batteries and insert fresh batteries (2x type AA / LR6, alkaline) according to the illustrations
in the battery compartment. Now fold the battery compartment cover back onto the housing until the
cover clicks into place. If you are not going to use the transmitter for a longer period of time, please
remove the batteries to avoid damage to the transmitter due to leaking batteries.
ATTACHING THE BODYPACK TRANSMITTER
Attach the transmitter to a belt or strap as shown.
25