LD Systems ANNY 10 Manual De Usuario página 18

MAIN VOLUME
Starting from the main display, the overall volume can be adjusted directly by turning the rotary-push
encoder VOLUME / PUSH FOR MENU. The display changes automatically when the encoder is turned (see
illustration below). After about 10 seconds of inactivity, the main display is automatically shown again;
by pressing the encoder, the display immediately changes to the main display.
BLUETOOTH SETTINGS (BLUETOOTH)
Press the rotary-push encoder to enter the main menu and then select the BLUETOOTH menu item by
turning the encoder (dark background). Press the encoder again to enter the submenu and select the
desired submenu item by turning the encoder. Confirm by pressing the encoder. Refer to the following
table for information on the submenu items. Select •MAIN MENU in the submenu and press the encoder
to return to the main menu, select •HOME in the main menu, confirm by pressing the encoder, and then
return to the main display. After about 10 seconds of inactivity, the main display is automatically shown.
Pairing with an Bluetooth playback device: Select BLUETOOTH in the Bluetooth menu, confirm, then
select PAIRING and confirm again. The Bluetooth module is now ready for pairing. The Bluetooth symbol
flashes for the duration of the pairing readiness. Activate Bluetooth on your playback device (smartphone,
tablet, etc.) and select ANNY 10 in the Bluetooth menu. Pairing now takes place automatically. As soon
as the devices are paired, the Bluetooth symbol is permanently displayed and PAIRED is shown in the
Bluetooth menu. Audio playback via Bluetooth can now be started.
BLUETOOTH (Change status = turn encoder, confirm status change = press encoder)
BLUETOOTH
TWS
18
Activate Bluetooth
Deactivate Bluetooth
Activate TWS
Deactivate TWS
PAIRING
OFF
LINK
OFF