LD Systems ANNY 10 Manual De Usuario página 20

AUDIO (Change value or status = turn encoder, confirm value or status change = press encoder)
 MAIN MENU
Back to main menu
PRESET
Speaker preset selection
HIGH EQ
Adjust treble frequencies from -12dB to +12dB
MID EQ
Adjust mid frequencies from -12dB to +12dB
LOW EQ
Adjust bass frequencies from -12dB to +12dB
DELAY
Time delay of the sum signal in 0.5 m steps up to 10 m,
e.g. for a delay line (0 m = OFF, display in metres and feet).
PRIORITY
Priority circuit for the inputs INPUT 1, 2 or 5/6. If an input is assigned priority
and a signal is present at it, the volume of the other inputs is automatically
reduced. If the signal is no longer present, the volume of the other channels
is raised again to the original value after a few seconds (no multiple selection
possible, OFF = function deactivated).
EFFECT SETTINGS (EFFECT)
Press the rotary-push encoder to enter the main menu and then select the menu item EFFECT by
turning the encoder (dark background). Press the encoder again to enter the submenu and select the
desired submenu item by turning the encoder. Confirm by pressing the encoder. Refer to the following
table for information on the submenu items. Select •MAIN MENU in the submenu and press the encoder
to return to the main menu, select •HOME in the main menu, confirm by pressing the encoder, and then
return to the main display. After about 10 seconds of inactivity, the main display is automatically shown.
EFFECT (Change value or status = turn encoder, confirm value or status change = press encoder)
FX TYPE
Selecting the effect type or
switching off the effect (OFF)
FX SENDS
Setting the effect sends for
inputs INPUT 1, 2 and 5/6
20
SMALL REVERB
LARGE REVERB
PLATE REVERB
DELAY
OFF
INPUT 1 0 – 100%
INPUT 2 0 – 100%
INPUT 5/6 0 – 100%
MUSIC
VOCAL
LIVE
ECO
OFF
INPUT 1
INPUT 2
INPUT 5/6
OFF