Idiomas disponibles
Idiomas disponibles
Push notifications
On the device menu tap the 3 dot
select "Alarm Notifications"
"Alarm Notification" button to turn activate /
deactivate the push notifications.
Important: Ensure that you give the app the permission to show pop up notifications
on the home screen.
Motion detection
To enable / disable motion detection go to: Camera dashboard --> settings icon --> Arm
Setting --> Motion detection. Note: Motion detection its enable by default.
NOTE: To receive push notifications "motion detection" must be enabled.
Motion detection zones
To adjust the detection area which is
enabled for motion detection go to:
Camera dashboard --> settings icon
Arm Setting --> Detection region setting
By default the motion zone covers the
camera vision field completely.
To delete all the previously selected
detection zones, tap on the "Clear" icon. To
delete specific areas tap the "Eraser" icon
and slide your finger through the screen.
Tap again the "Eraser" icon to exit eraser
mode. To create a new detection zone tap
on the screen and draw a motion detection
zone. Create as many motion zones as
needed, then tap "Save" to save the motion
zones.
Motion sensitivity
To adjust the motion sensitivity go to: Camera dashboard --> settings icon
setting --> Detection Sensitivity.
Adjust the motion sensitivity according to your needs between 1 (min) and 5 (max).
Please keep in mind that setting to high sensitivity could trigger false alarms and at the
same time low sensitivity could ignore alarms on low light environment.
Tap the
icon to save the changes
NOTE: Motion detection is triggered based on a certain percentage of pixel change.
Low sensitivity: The camera will alert, if many pixels in the picture have changed.
High sensitivity: The camera will alert when few pixels in the picture have changed.
icon and
. Then tap the
-->
Clear
Invert
Eraser
--> Arm
9
