cecotec ENERGYSILENCE AERO 5200 BLACK PRO Manual De Instrucciones página 46

ENGLISH
- The indicator light will light up while the appliance is in operation.
- Use the speed buttons to select the power level.
- Press the power button to switch the appliance off.
- Use the timer buttons to select the operation time of the appliance. The fan will turn off
once the selected time has elapsed.
- Press the light button to turn the fan's light on and off.
Winter/Summer function
- Use the blade reversal button to activate the reverse rotation.
- Winter function: the blades start to rotate clockwise, causing warm air to be distributed
throughout the room.
- Summer function: the blades start to rotate counterclockwise, generating a cool breeze.
Remote control pairing
- Turn on the receiver and press the Light on/off button on the remote control once. If you
hear two beeps, it means that the learning process has been made successfully.
- RF digital wireless transmission technology is adopted to realise one-to-one control by
providing a code-matching rate of less than 1/50000. The transmitter and receiver have
the same code number at the back, so in the event of a fault, a receiver and transmitter
with the same code number must be returned to the manufacturer.
NOTE:
If the remote control cannot control the receiver, check if the batteries make contact, if
1.
they are inserted correctly and if they are not flat.
If the remote control cannot control the receiver, check if there are other appliances
2.
operating with a remote control nearby, as they may cause interference. If you remove
these appliances from the room where the fan is located, the remote control will work
properly again.
Use this appliance with the correct voltage. If the voltage is too low, the remote control
3.
will not work.
If you are not going to use the remote control for a long period of time, remove the
4.
batteries.
5. CLEANING AND MAINTENANCE
Clean the fan regularly.
1.
When cleaning, only use a soft brush or lint-free cloth to avoid scratching the finish.
2.
Abrasive cleaning agents are not necessary and should be avoided in order not to damage
3.
the finish.
46
ENERGYSILENCE AERO 5200 BLACK PRO
ENERGYSILENCE AERO 5200 WHITE PRO