Idiomas disponibles
Idiomas disponibles
WARNING
To avoid electric shock, do not use the meter if the bat-
tery compartment cover is not in place or is not
properly fastened.
CMP-100 is powered by by three LR03 AAA 1.5 V batteries. It is
recommended to use alkaline batteries.
To replace the batteries:
•
set the rotational function selector at OFF,
•
turn the fixing screw of the compartment cover to the position:
•
remove the cover,
•
remove the batteries and insert a new ones, observing the polarity,
•
put on the cover and turn the fixing screw to the position:
• While performing the measurements with the low battery
symbol displayed, the user must be aware of additional
measurement uncertainties or unstable operation of
the device.
• If the meter does not work properly, check the batteries
in order to ensure that they are in proper condition and
properly installed in the device.
7 Replacing the batteries
CMP-100 – USER MANUAL
37
