Idiomas disponibles
Idiomas disponibles
6.1
Button REL
Press the
measurement function symbols and buttons.
6.2 LPF button – low-pass filter
The low-pass filter minimizes signals with frequencies above the
cut-off frequency, reducing their effect on the measurement result.
To activate the mode, press briefly the LPF button.
To disable the mode, press and hold the LPF button.
6.3 PEAK button – peak value measurement
PEAK function allows user to record very short alternating cur-
rent surges.
The meter will update the display each time a lower negative, or
higher positive peak occurs.
To activate the mode, press briefly the PEAK button.
To disable the mode, press and hold the PEAK button.
Running PEAK before that may cause overrange symbols to appear.
6 Special features
– backlighting of functions and buttons
button to enable or disable the backlighting of the
CMP-100 – USER MANUAL
35
