Idiomas disponibles
Idiomas disponibles
5. Press the
right to left to supply air to the room. Press the button again to deactivate the oscillation
function.
NOTE: you can move the fan up or down manually to adjust the air outlet angle.
6. Press the
the button to switch it back on. If no action is performed within 10 minutes, the fan will
automatically switch off the decorative light. Pressing any button will turn it back on.
WARNING: if you are not going to use the fan for a long period of time, disconnect it from the
mains.
Remote control
Fig. 4
1- Light button
2- Speed button
3- Power button
4- Oscillation button
5- Timer button
NOTE: the remote control has the same functions as the fan control panel.
-
The remote control requires 1 x CR2025 3V battery.
Please note: follow the instructions for use and recycling procedures on the battery
packaging.
Replacing the remote-control battery
Fig. 5
1- Open the battery compartment by sliding the cover downwards.
2- Insert the battery into the battery compartment observing the polarity.
3- Close the compartment.
5. CLEANING AND MAINTENANCE
NOTE
-
When the fan is not to be used for a long period of time, clean and dry it thoroughly. Then,
take it apart and store it in its original box.
button to activate the oscillation function. The fan will oscillate from
button from the remote control to switch off the decorative light. Press
ENERGYSILENCE 1000 CYCLONE SMART
ENGLISH
39
