Idiomas disponibles
Idiomas disponibles
ENG
1. RGB LEDs
2. Left stick(L3)
3. Direction pad
4. Share button ("share")
5. Touchpad
6. Option button ("option")
7.
= Square button
8.
= Triangle button
9.
= Circle button
10.
= Cross button
11. Right stick (R3)
12. Home/"PS" button
Warning instructions
1. To avoid electric shock, do not disassemble the product by yourself. In case repairs
are needed either contact the retailer, or an authorized electrician.
2. Do not place the product near a window where it would be exposed to direct
sunlight.
3. Protect the device from splashes of water and other liquids. Do not let any liquid into
the game controller.
4. Do not dispose of this product in a fire. Follow local guidelines regarding correct
disposal of electrical and electronic waste.
5. Use your hands to control the game controller. Do not put the game controller in
contact with your head or face or near the bones of your body. The vibration function
may aggravate existing injuries.
6. To avoid short circuit, fire hazard and electrical shock, do not insert any objects into
the game controller.
7. Do not place any heavy objects on the game controller.
8. Do not expose the product to physical shock or excessive vibrations.
Trigger sensitivity switches
R2 and L2 buttons can have their sensitivity set with the trigger sensitivity switches.
Use the switches on the back of the controller to set sensitivity.
The 2 modes are: Short distance(digital) and long distance (analog).
While short distance is selected, the buttons become a digital button having only 2
values, 1 or 0.
We recommend short distance mode for FPS games for example, where it can be used
for fast trigger action.
While long distance is selected, the hall sensor is active, for fine control.
We recommend long distance mode for driving games for example, where it can be
used for seamless acceleration.
LEDs
Press option + direction pad, up or down to change LED brightness. The 6 settings are:
0%, 20%, 40%, 60%, 80%, 100%.
Press option + direction pad, left or right to change LED mode.
The controller will remember last used LED mode.
Charging
Use the included USB-A to USB-C cable to charge. Connect to a USB power source
such as a computer with a USB-A port or a USB-A power adapter. The battery is a
1000mAh rechargeable battery.
While charging and powered off, a LED will change to orange.
When fully charged the LED will turn off.
If the battery drops below 3.5V and while connected to a game console (PS4 or
Switch), the screen will flash 3 times to indicate low battery. Below 3.4V the controller
will automatically power off.
Sleep mode
The controller will automatically enter sleep mode after 15 seconds if it remains
unconnected.
The controller will automatically enter sleep mode after 10 minutes of inactivity while
connected a game console. The duration can be adjusted in the gaming console's
settings(only for PS4 or Switch). The duration for PC is around 8 minutes.
Pressing the home button during sleep will wake up the controller.
Connect
PS4
This product connects wirelessly with Bluetooth, which is compatible with PS4.
First time connection to a PS4 console: Connect the USB cable to the game controller
and to the PS4.
Press the home/"PS" button. The LED will turn solid, indicating successful connection.
Disconnect the cable, the game controller now works wirelessly via the Bluetooth
connection.
Reconnect: Press and hold the home/"PS" button for about 1 second, the game control-
ler will connect automatically.
You can also play on the PS4 with the cable connected, thus charging the game
controller at the same time.
13. 3.5 mm audio port
14. Turbo button
15. R2 button
16. R1 button
17. L1 button
18. L2 button
19. Off button
20. USB-C charge port
21. MR button
22. Trigger sensitivity switch (for R2 button)
23. Trigger sensitivity switch (for L2 button)
24. ML button
9
