Parkside PSHL 2 D1 Instrucciones De Funcionamiento Y De Seguridad página 9

If the filter is faulty, the user must stop using the welding helmet im-
„
mediately. Slag splashes can damage the surface of the filter and
cause injury to the user's skin or cause other serious accidents.
This product is temperature resistant and hardly inflammable but in
„
case of direct contact with naked flames or in case of access to an
object with a high temperature, the helmet may begin to burn or
melt. Please store and only use the welding helmet in the manner
described in order to reduce such risks.
The ADF filter is an electronic product that is not waterproof. Plea-
„
se ensure it is kept dry and clean and not stored in a damp envi-
ronment.
Improper use can result in injuries to the user and other types of ill-
„
nesses.
Please examine the filter prior to each use. As soon as the function
„
and appearance seem defective, they must no longer be used.
The use of the welding helmet is prohibited if the filter flickers or if
„
the level of darkening no longer corresponds to the standard value
or there are other abnormal working conditions.
Please do not expose this product to unnecessary solar radiation.
„
Please only use original spare parts. The use of non-original parts
„
can cause problems with regard to the protective function, servi-
ceability and degree of product protection.
Exceeding the service life (insufficient protection) – please check
„
the welding helmet prior to each use for damage and durability.
Using eye protection without the filter effect against radiation (da-
„
mages the eyes) – prior to each use check whether the eye protec-
tion exhibits the necessary scale number.
Using the product against splashes (insufficient protection) – al-
„
ways check whether the correct protective effect is present.
Using the product against large dust particles (injury, accident).
„
The eye protection equipment must only be used for the work de-
scribed in the operating instructions. Any deviation from the inst-
ructions in the operating instructions can result in injuries or acci-
dents.
Using damaged products (insufficient protection) – prior to each
„
use check the welding helmet for damage and durability.
Improper use of the eye protection (injury, accident).
„
The eye protection device must only be used for the work descri-
bed in the operating instructions. Any deviation from the instructi-
ons can result in injuries or accidents.
This device may be used by children aged 16 years and older,
„
GB/IE/NI/CY/MT
9