Idiomas disponibles
Idiomas disponibles
4. OPERATION
4.1. Welder setup
Gas Regulator
Heating cables
Tracheal
Cylinders
Input cables
Wire Feeding Device
Controllers
Welding torch
Grounding
Workpiece
Control Cable
Welding cable (+)
Welding cable (-)
- The equipment must be in a well ventilated area and the ventilation areas uncovered.
- Connect the equipment as close as possible to the power supply, take into account the losses due to
voltage drops, use the appropriate cable size for consumption and length.
- Check the connection between the wire and the traction rollers and verify that they are correct.
- Check that the torch is correctly connected to the EURO connector.
- Check the gas connection.
- Check the connection of the work clamp, it cannot be loose or loose, this will negatively a ect the life
and performance of the equipment.
06
SWEISSWELD.COM
