cecotec ENERGYSILENCE AERO 5200 WHITEWOOD Manual De Instrucciones página 50

ENGLISH
NOTE: make sure that the groove (a) of the hanging ball is correctly aligned with the tab (b) of
the mounting bracket (c). Fig. 11
WARNING: the fan must be hung with at least 230 cm clearance from the floor to the blades.
Connecting the remote-control receiver cables
WARNING
To avoid possible electric shock, make sure that the power is disconnected at the main fuse
box before wiring.
Insert the receiver into the mounting bracket as shown in figure 12 so that the remote control
can pair with the remote control and operate correctly.
Receiver wiring
The receiver wiring method shall follow the following scheme in Figure 13.
Installing the decorative cover
To mount the cover, tighten the two screws provided in the assembly kit as shown in Figure
14.
4. OPERATION
Remote control
Fig. 15
1. Power indicator light
2. Speed buttons
3. Off button
4. Reverse rotation button
5. Natural Breeze button
6. Pairing button
7. Timer buttons
- The operation indicator light on the receiver is used to indicate whether the fan is on
or off. When you switch on the fan from the remote control, the receiver will receive
the signal and activate the fan motor. At the same time, the indicator light will light up,
indicating that the fan is in operation. When you switch off the fan, the indicator light will
go out.
- The speed buttons allow you to switch on the fan and choose the desired speed. It has 6
speeds to regulate the intensity of the air flow.
50
ENERGYSILENCE AERO 5200 WHITEWOOD/ BLACKWOOD