Motorola ROKR 300 Guia De Inicio Rapido página 4

When the speaker is powered off, no LEDs light up. Plug the
cable into the USB-C charging port. LED 1 flashes orange
during charging the battery. When fully charged, LED 1 lights
up orange for 10 seconds then turns off. When the speaker is
powered on, check the behavior of LED 1 in section 6.
Note
To protect battery life, it is recommended to fully charge it at
least every 3 months.
Do not expose ROKR 300 to liquids or water while charging.
3. Pair your speaker for the first time
1. Press and hold
automatically enter pairing mode.
2. If this is not your first time using it, press and hold
The LED 1 indicator flashes blue fast when entering pairing
mode.
3. Select ROKR 300 from the Bluetooth menu of your device.
When connected successfully, the white LED 2 will turn on.
You will hear a musical tone.
4. Connect the speakers to TWS mode
To achieve the True Wireless Stereo (TWS) sound quality,
you will need two speakers and set them to the left and
right channels. For a full explanation of this feature, please
download the user guide from motorolasound.com.
4
to turn on your speaker. It will
O
for 3s.
B
ROKR 300