cecotec ENERGYSILENCE AERO 3600 INVISIBLE NATURAL STYLE Manual De Instrucciones página 46

ENGLISH
3. ASSEMBLY
Fig. 2 key:
1. Wood screws
2. Mounting bracket
Fig. 3 key:
1. Expansion bolt
2. Screw hook
3. Drilling diagram
- Wooden ceiling: secure the mounting bracket firmly to the wooden ceiling beam with a drill
bit. Fig. 2
- Concrete ceiling: you can enlarge the holes in the mounting bracket with a medium 8 mm
drill bit. Use the M6 expansion bolts to attach the mounting bracket to the side of the screw
hook. The distance between the screw hooks and the mounting bracket must be between
8 and 10 mm. The installation of the screw hook must not interfere with the mounting
bracket and must not affect the positioning of the receiver. Fig. 3
Installation of the safety rope
1. Loosen the safety rope screw, place the rope ring on the screw hook and tighten the rope.
Finally, retighten the screw. Fig. 4
2. Connect the cable according to the wiring instructions shown in Fig. 5
Fig. 5 key:
L: Live wire
N: Neutral
: Earth wire
3. Unpack the ceiling fan carefully, remove all parts and components and place it on a cloth or
soft surface to prevent damage. Do not lay the motor housing on its sides to avoid damage
to the housing. Before starting the installation, check that no parts are missing.
Warning: to avoid electric shock, all electrical operations should only be carried out after
disconnecting the power by removing the fuses or turning off the circuit breaker.
Installation of the mounting bracket
In case of installing the ceiling fan to a wooden joist, 4 self-tapping screws should be enough
to support the weight. Fig. 6.
4. Screw the mounting bracket to the ceiling and make sure all connections are secure to
46 ENERGYSILENCE AERO 3600 INVISIBLE NATURAL STYLE