Ki Mobility FOCUS CR Manual De Instrucciones página 31

V. SET UP & USE OF YOUR WHEELCHAIR
M. Reclining Backrest
Angle Adjustment of Recline Backrest Plates:
WARNING: Remove patient from wheelchair prior to making this adjustment. Failure to do so
could result in death or serious injury.
1. The reclining option comes with three different backrest angle adjustment options. See
Fig. 25 for range information prior to making the adjustment.
2. Using a 4mm Allen wrench and a 10mm wrench, remove button head screws (Fig. 25) with
their washers and nuts.
3. Rotate backrest to desired angle. Each hole represents 65° of rotation (Fig. 25).
4. Replace button head screw and tighten with washer and nut until securely fastened.
5. Repeat for opposite side of chair.
Fig. 25
30