Ki Mobility FOCUS CR Manual De Instrucciones página 16

Ocultar thumbs Ver también para FOCUS CR:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

V. SET UP & USE OF YOUR WHEELCHAIR
B. Transit Use
The rider must use a Wheelchair Tie-down and Occupant Restraint System that complies
with RESNA WC-4:2012, Section 18: Wheelchair tie-down and occupant restraint
systems for use in motor vehicles or ISO 10542-1:2012 Technical systems and aids for
disabled or handicapped persons -- Wheelchair tie-down and occupant-restraint
systems -- Part 1: Requirements and test methods for all systems.
Attach wheelchair tie-downs to the four securement points (two front, two rear) on the
Focus CR wheelchair with the Transit Option (Fig. 1) in accordance with the wheelchair tie-
down manufacturer's instructions and RESNA WC-4:2012, Section 18 or ISO 10542-
1:2012 - Part 1.
Attach occupant restraints in accordance with the occupant restraint manufacturer's
instructions and RESNA WC-4:2012, Section 18 or ISO 10542-1:2012, Part 1.
Use of lap belts, chest straps, shoulder harnesses, any other positioning strap system or
positioning accessory should not be used, or relied on as an occupant restraint, unless it is
marked as such by the manufacturer in accordance with RESNA WC-4:2012, Section 18
or ISO 10542-1:2012, Part 1.
Use of headrests, lateral supports or other positioning accessories should not be used, or
relied on as an occupant restraint, unless it is marked as such by the manufacturer in
accordance with RESNA WC-4:2012, Section 18 or ISO 10542-1:2012, Part 1 or RESNA
WC-4:2012, Section 20: Wheelchair seating systems for use in motor vehicles or ISO
16840-4:2009 Wheelchair seating -- Part 4: Seating systems for use in motor vehicles.
Any aftermarket seating should be tested to comply with RESNA WC-4:2012, Section 20
or ISO 16840-4:2009 - Part 4.
Attach the seating to the wheelchair frame in accordance with the seating manufacturer's
instructions and RESNA WC-4:2012, Section 20 or ISO 16840-4:2009 - Part 4.
Aftermarket accessories such as trays, oxygen tank holders, oxygen tanks, IV poles, back
packs, pouches and other items not manufactured by Ki Mobility should be removed and
secured separately in the motor vehicle. In the event of an accident, these items can
become dangerous projectiles which may injure or kill you or other occupants of the motor
vehicle.
If the wheelchair has been involved in an accident, you should not continue to use it, as it
may have suffered fatigue that may not be visible.
DANGER: Failure to comply with any of these instructions could result in severe injury or death!
Securement
Points
Fig. 1
Securement
Points
15

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Focus creFocus cr ttlFokus cr ttl

Tabla de contenido