Idiomas disponibles
Idiomas disponibles
Ice Shaver Use Instructions
Components Fig.A
1. Lid
2. Lock nut
3. Ice bucket
4. Container
5. Main unit
6. Power cord
7. Support base
Instructions for use
Insert the main unit into the opening on the support base.
Place the container on the main unit by aligning the flap on the container with the seat in the main unit (Fig.B).
Insert the ice bucket into the container and place the lock nut in the hole on the ice bucket (Fig. C). Turn the nut
lockwise to lock the ice bucket.
Place a glass on the base under the ice bucket.
Insert the ice into the basket, taking care never to fill it over the MAX level indicated on the basket.
Insert the plug into the socket and place the lid on the container by aligning the flap of the lid with the seat on
the main unit.
Rotate the lid counterclockwise. The flap on the cover enters the machine body and activates the rotation of the
engine. The basket starts spinning and the crushed ice will drop into the glass. The lid must be kept stuck with
the hand. To stop rotation of the basket, turn the lid clockwise, bringing the flap on the lid back out of the machine
body (Fig. D).
Disconnect the plug from the socket.
At the end of the operation, there may be residues of ice in the basket and in the container. Remove excess ice.
Cleaning
Disconnect the plug from the socket and disassemble the appliance in all its components.
Wash the lid, ice bucket, container and lock nut in warm soapy water.
Dry all components.
Clean the motor body and the support base with a damp sponge or rag.
Suggestions
If the appliance motor works excessively, try leaving the ice cubes at room temperature for a few minutes.
Never fill the ice bucket over the MAX level. The lid must close on the container without forcing.
Ice in the shape of cubes will be shredded better than ice with rounded shapes.
Use medium / small ice cubes. If the cubes are very large, break them before inserting them into the product.
Technical data
Power: 30W
Power supply: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
9
EN
