Bosch BMCT-SLZ Guía De Uso página 15

Light/shutter control II
Start-up/pairing
Ensure that you have a Bosch Smart Home controller and the Bosch Smart
Home app and have successfully configured both. Now start the Bosch
Smart Home app and select "Add new device". Follow the instructions in
the app.
Once the module has been switched on via the fuse, it is in pairing mode
for 3 minutes. Pairing mode can be started on an unpaired module by
pressing the system button (1) again or a connected button/switch (S1/
S2).
݅ You can also view the explanatory video and additional information on
our website for help with mounting, installing, starting up and restoring
the factory settings on your Bosch Smart Home light control unit:
→ https://www.bosch-smarthome.com/rom/light-shutter-module-2
The status LED (2) shows the status of the light/shutter module using
flashing codes.
Status LED
flashing
Device status
sequence
Pairing mode (is
Flashes active) or device is
orange communicating with the
controller
Pairing mode
Flashes
(successful) or process
green
confirmed
Pairing mode (not
Flashes
successful) or process
red
failed
Flashes
red 6x The device is defective
(long)
↑Contents
8-750-002-899 | V001 | 06/2024
Recommended action
Please wait
–
If this is the first pairing attempt,
please try again. Otherwise
reset the device to the factory
settings and contact the service
department if necessary.
Please contact support.
English | 15
Bosch Smart Home