Bosch BMCT-SLZ Guía De Uso página 10

Light/shutter control II
Installation
݅ You must connect the module according to your desired purpose,
then link it with the Smart Home controller and configure the purpose
(shading or lighting) in the app.
݃ Incorrect configuration can lead to a defect with the connected
consumers.
݅ The configuration, shading or lighting, is stored in the device and can
only be cancelled by resetting the device to factory settings.
݅ If the device has not been configured for shading or light, the inputs S1/
S2 do not issue any switching commands.
݃ Ensure that the terminal area does not come into contact with the metal
parts of the installed device.
݃ The module may only be used outdoors with the corresponding
protective housings (IP66).
↑Contents
8-750-002-899 | V001 | 06/2024
English | 10
Bosch Smart Home