Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 6
6.0
LS
R
LS6.0R SHOwN
SEAT BACK BRACKET
SEAT BACK BRACKET PLATE
MESH SEAT BACK
POWER
ADAPTER
FLAT WASHERS (C)
SEAT CABLE
HEART RATE WIRES
HARDwARE fOR STEP 6 :
NUT (F)
Qty: 3
* NOtE: this step is for LS6.0R models only.
A
Open hardware for step 6.
BOLTS (I)
B
place seat baCk braCket plate on the inside
of the mesh seat back mount. Align mesh seat
NUTS (F)
baCk to seat back bracket.
C
Attach mesh seat back to seat back bracket using 3
bolts (i) and 3 flat washers (C) from the rear
and 3 flat washers (C) and 3 nuts (f) on the
other side of the seat back bracket plate.
Connect heart rate wires to seat Cable.
d
Attach seat Cable as shown. plug in power
adapter as shown.
ls6.0r assemblY Complete!
BOLT (I)
FLAT WASHER (C)
35 mm
16 mm
Qty: 3
Qty: 6
6.0
LS
R
17
Tabla de contenido
