Livestrong LS5.0R Manual Del Propietário página 12

,
5.0
LS R LS
LS6.0R SHOwN
5.0
LS R
LS 6.0 R
CONSOLE
CONSOLE CABLES
PRE-INSTALLED SCREWS
CONSOLE MAST
PEDALS
LEFT CRANK ARM
NOtE: Be careful not to pinch any wires while attaching the console.
12
ASSEMBLY STEP 3
6.0
R
PEDAL STRAP
PEDAL
* NOtE: there is no hardware for this step.
A Attach pedal straps to pedals.
B Attach the right pedal to the right Crank
arm, tightening it CloCkwise with the provided
13mm/15mm flat wrench.
C Attach the left pedal onto the left Crank
arm, tightening it Counter-CloCkwise with the
provided 13mm/15mm flat wrench. (NOtE: the left
crank arm is reversed threaded so it is very important
that it is tightened counter-clockwise. tightening it
the opposite way can damage the pedal or the crank
arm or both.)
d Connect the Console Cables and carefully tuck
the Console Cables into the Console mast.
Attach the Console to the Console mast using
E
the 4 pre-attaChed sCrews (the screws will
have to be removed from the console first).