Silvercrest SBFL 5 A1 Guía Breve página 22

Use a suitable object, such as a crosshead screwdriver, to press
the lock-in point in the upper opening of the mounting clip.
Pull the mounting clip down and out of the device.
. Attach bicycle speaker
The bicycle bracket is suitable for all standard handlebars.
Loosen the mounting screw of the bicycle bracket (B), making
sure that the small locking nut on the underside does not get lost.
Place a non-slip rubber pad suitable for the handlebars in the
bicycle bracket.
Attach the bicycle bracket to the handlebar of the bicycle and
align the bracket so that you can operate the bicycle speaker
optimally (see Fig. G).
Tighten the mounting screw firmly again.
Slide the bicycle speaker onto the bicycle bracket so that the
mounting clip goes over the track of the bicycle bracket and then
clicks into place audibly. (see Fig. H).
 - English