JVC EXAD KD-AV7010 Manual De Instrucciones página 75

• This unit cannot play back the files which
have the data such as WMA, WAVE,
ATRAC3, MPEG 2.5, etc.
• The speaker/signal indicators appear in the
following cases (only for DVD/CD):
– When a different type of the digital signal is
detected, or
– When you start playback or resume
playback from pause.
Speaker indicators
SUBWFR
– The speaker indicators—frames of "L,"
"C," "R," "LS," and "RS" light up, when
the corresponding speakers are set to
"LARGE" or "SMALL" (see page 51).
Sounds come out of the speakers whose
speaker indicators is lit on the display.
– The indicator lights up when
"SUBWOOFER" is set to "YES" (see page
51).
– The signal indicators changes its color from
white to yellow to indicate the incoming
signals—L (front left) / R (front right) / C
(center) / LFE (low frequency effect) / LS
(left surround) / RS (right surround) / S
(monaural surround).
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "DISC" for the playback
source, disc play will start automatically.
Stopping play
• Except for MP3 discs: This unit can
remember the end point (until the disc is
ejected), and when you start playback again,
playback begins from where it has been
stopped (Resume play).
• For MP3 discs: This unit can remember the
last playing track (until the disc is ejected),
and when you start playback again, playback
begins from the beginning of the same track.
Ejecting a disc
• If the ejected disc is not removed within 15
Displaying the disc text information
• For MP3: If no ID3 tag is recorded, folder
Notes on Recordable (R) and Rewritable (RW)
Signal indicators
discs
• Use only "finalized" discs.
SUBWFR
• For DVD-R/DVD-RW: This unit can play
• For CD-R/CD-RW: This unit can play back
• This unit can play back multi-session discs;
• Some discs may not play back on this unit
• Rewritable discs may require a longer readout
• Do not use following discs:
seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
and track names are displayed instead.
back only discs recorded in the DVD-Video
format. (Discs recorded in the DVD-VR
format cannot be played.)
only audio CD (CD-DA) files if a disc
includes both audio CD (CD-DA) files and
MP3 files.
however, unclosed sessions will be skipped
while playing.
because of their disc characteristics, and for
the following causes:
– Discs are dirty or scratched.
– Discs are kept in a place where temperature
becomes extremely high.
– Moisture condensation on the lens inside
the unit.
– The pickup lens inside the unit is dirty.
– Discs on which the files are written with
"Packet Write" method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.)
time since the reflectance of rewritable discs
is lower than that of regular DVD/CDs.
– Discs with stickers, labels, or protective
seal stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs.
75