Changing The Monitor Position/Angle; Removing The Monitor - JVC EXAD KD-AV7010 Manual De Instrucciones

○ ○ ○ ○ ○ ○ ○ ○ ○
Changing the monitor position/
○ ○ ○ ○ ○ ○ ○ ○ ○
angle
You can change the monitor position and the
monitor angle.
• Once you change them, they are stored. The
monitor opens at the stored position and
angle, next time you eject the monitor.
To change the monitor position
On the main unit
To change the monitor angle
On the main unit
Each time you press the button, the monitor
changes its angle step by step.
• By holding the button (+/–), you can easily
change the angle to its extreme (+/–).
MAIN SUB
then
AVOUT VOL
On the remote controller
To operate the car switches behind the
monitor, press and hold OPEN.
The monitor change its angle to the illustrated
position for about 30 seconds.
○ ○ ○ ○ ○ ○ ○ ○ ○

Removing the monitor

When detaching and attaching the monitor,
observe the following:
• Be careful not to drop the monitor.
• Be careful not to damage the connectors.
To detach the monitor
1
Hold
The monitor goes back into
its compartment if it has
been used, then comes out
halfway.
2
3
Insert the blind cover to protect the
internal mechanism from dust.
To attach the monitor
Insert the monitor
into the compartment
with the screen
facing down.
To return to its
previous angle
within 30 seconds,
press OPEN again.
55